Medici Standard Medium Level WC with 520 Lever Cistern

The cistern height can be varied by cutting the vertical flush pipe to length - maximum height is 1,425mm to the top of the cistern, minimum height is1,125mm.

Water Inlet valve hole is located on the base of cistern tank on the right hand side.

Bottom inlet valve (SP5A). Back inlet valve available as optional item (SP511).

SP511 : Back entry kit for C1/C2/C3/C4/C30, including back entry inlet valve with flexible hose and plug.

Dual flush cistern fittings with ceramic lever on the right.

Press lever down for 6 litre flush and up for 3 litre flush.

P trap standard height pan - height from floor to pan rim is 42cm.

Ceramic soil connection pipes : straight connector to the wall : C29 M. The S trap connector bending down to the floor : C26 M.

Spare parts

SP511	back entry kit for C1, C3, C2, C4, C30, ARC5, including back entry inlet valve with flexible hose and plug
SP1021	bottom sealing washer of flush valve for product C1, C3, C3, C4
SP1353	brass fixing nut for all finishes products of T30, T31, T33, T34
SP84	cistern flush valve with control cable for cistern fitting SP5 (excluding lever and inlet valve)
SP119	decorative cover of cistern connection for T30CHR & T33CHR
SP1355	fixings for T33 CHR
SP136	flush cone washer for T33 CHR
SP187	flush pipe for T33CHR
SP1323	flush pipe wall bracket for T33 CHR
SP508	kit for close couple cistern
SP507	kit for low level installation for close coupled cisterns C1, C2, C3, C4, T71 CHR
SP898	pan decoration plate (including the screws, washers and fixing nuts) of product T33 CHR
SP169	rubber insert for all finishes products of T30, T33, SP20 clip
SP17	screw fixing pack for pan and bidet
SP802	the bigger stopper for SP5A, ARCSP7, C24C, SP7
SP460	thick rubber washer for T33CHR