T58ALU Burlington high cistern |
T30CHR High Level Flush Pipe kit including Lever, Rigid pull chain, Flush pipes, reverse screw cistern connector, Stopper and Ornate brackets |
P2 Low/high level pan |
S15 GOL Traditional high level mahogany WC seat |
T58ALU - cistern - Polished Aluminum |
T30CHR - fittings - Polished Chrome |
P2 - pan - Gloss White |
S15 GOL - seat - |
T58ALU - cistern - Aluminum |
T30CHR - fittings - Brass |
P2 - pan - Vitreous China |
S15 GOL - seat - solid wood and mdf |
T58ALU - 430 x 200 x 380mm |
T30CHR - 188 x 35 x 1720mm |
P2 - 524 x 360 x 403mm |
S15 GOL - 673 x 400 x 94mm |
T58ALU - cistern - 8.24kg |
T30CHR - fittings - 3.45kg |
P2 - pan - 17kg |
S15 GOL - seat - 7.1kg |
T58ALU - cistern - 8.8kg |
T30CHR - fittings - 4.91kg |
P2 - pan - 18.7kg |
S15 GOL - seat - 7.7kg |
T58ALU - 450 x 215 x 400 = 0.0387 m3 |
T30CHR - 1115 x 310 x 70 = 0.0242 m3 |
P2 - 542 x 372 x 428 = 0.0863 m3 |
S15 GOL - 700 x 440 x 100 = 0.0308 m3 |
Lifetime guarantee*
*Full terms & conditions here |
BS EN 248:2002 |
BS EN 33:2019 |
BS EN 14055:2018 |
BS EN 997:2018 |
The water inlet valve hole is located on either side of the cistern tank. |
The high level wc uses a standard low level pan and specialed high level cistern, connected with a high level flush pipe kit T30 CHR. |
“The flush mechanism is a dual flush rod pull cistern T58 ALU”. |
A special flush pipe kit that allows the cistern to be placed on a wall next to the pan is available : Angled Flush Pipe Kit T34 CHR. |
High Level wc can be used where the soil pipe is located in the floor. The pan can be located over the soil pipe by cutting the horizontal flush pipe to length. |
The cistern height can be varied by cutting the vertical flush pipe to length - maximum height is 2,380mm to the top of the cistern, minimum height is 1,625mm. |
Bottom inlet valve (SP5A). |
Regal Height pan ( floor to pan rim height 48cm ) available : P16. |
Ceramic soil connection pipes : straight connector to the wall : C29. The S trap connector bending down to the floor : C26. |
P trap standard height pan - height from floor to pan rim is 40cm. |
SP459 | black rubber wedge for all finishes products of T30 |
SP1353 | brass fixing nut for all finishes products of T30, T31, T33, T34 |
SP429 | buffer Clip for T30CHR without black rubber wedge |
SP17A | chrome cover caps(pair) for Burlington pans, bidet, semi pedestal and U1 |
SP1034 | chrome hole stopper of cistern fittings for high level cisterns C5, C5D, T58 ALU, T59 WHI, T60 BLA |
SP104 | control bracket for T30CHR |
SP119 | decorative cover of cistern connection for T30CHR & T33CHR |
SP7 | fittings for High Level Cistern including Cistern Lever |
SP97 | flush cone for HL cistern |
SP15 | handle for high level cistern from T30CHR kit |
SP10 | high Level Cistern lever |
SP1044 | high level dual flush valve including the cable, control box and cistern lever for product C5, T58 ALU, T59 WHI, T60 BLA, T70 CHR |
SP14 | high Level Rod for T30 CHR, T34 CHR |
SP384 | inlet valve with G1, 2 chromed-Brass shank and nut for High lever cistern fittings (part of SP7) |
SP1351 | long pull arm for High level cistern from T30CHR kit |
SP840 | noise reducer for high level cistern fittings |
SP146 | pin screw for T30 CHR |
SP918 | plastic hole stopper of cistern fittings for high level cisterns |
SP17 | screw fixing pack for pan and bidet |
SP1352 | spares for T30CHR: screw x 12, rawl plug x 12, rubber spacing washer x 4, pin screw x 1 |
SP1365 | the bottom section of the high level flush pipe |
SP95 | washers & plastic fixing nut for flush pipe |
SP387 | WC floor fixing plastic caps - GOLD |
SP1744 | white caps & inserts (2 pieces) of floor fixings for Burlington pans, bidets and urinals |