Classic 1910 dual outlet bath shower set with handspray kit

Product Options

Pressure options

Classic 1910 dual outlet bath shower set with handspray kit - low pressure

High pressure

Low pressure

As Shown

TK14 Dual Outlet digital processor with Traditional trim kit - high pressure

V70 Handspray Kit (including shower hook, telephone handset & hose and 1/2 outlet elbow)

W15 Bath overflow filler for single ended bath

TK4H - Combined product code

Colour

TK14 - - chrome

V70 - -

W15 - waste - Polished Chrome

Material

TK14 - - aluminum

V70 - - 0

W15 - waste - Brass

Size

TK14 - 330 x 302 x 88mm

V70 - 95 x 60 x 957mm

W15 - 780 x 116 x 73mm

Nett Weight

TK14 - - 1.95kg

V70 - - 1.09kg

W15 - waste - 1.17kg

Gross Weight Including Packaging

TK14 - - 4kg

V70 - - 1.44kg

W15 - waste - 1.7kg

Packed Dimension

TK14 - 532 x 410 x 144 = 0.0314 m3

V70 - 265 x 170 x 125 = 0.0056 m3

W15 - 815 x 125 x 128 = 0.013 m3

Guarantee

5 year guarantee*
*Full terms & conditions here

Standards Information

Additional Information

Consistent temperature - A built-in thermistor checks the temperature 10 times every second so that, even when someone is using water elsewhere in the house, the water temperature will stay exactly the same.

Shower controls are kept completely separate from the water in the valve, which means they always stay cool and safe to touch.

If there are any problems with your water supply, the shower will shut off immediately. This gives you the peace of mind of knowing your family are fully protected from hot water scalding or the discomfort of an unexpected cold shower.

Each digital processor has a pre-set maximum temperature of 41°C, which can be overridden and adjusted to 46°C. As bath temperatures are usually higher, when you divert to the bath outlet the maximum temperature will automatically rise to 44°C.

Installation - Push fit isolation valves, a standard electrical plug fitting and easy to set up cable connections allow make your plumber’s job simpler.

Cleaning mode - While the shower is off, set the temperature to midway between hot and cold, then press and hold the dial for 5 seconds. The light on the controller will come on to show you it’s locked, then after one minute it will automatically unlock.

Spare parts

SP417	bolt for CW9, W2, W15
V26	burlington Shower hose 1500mm
SP108	ceramic ring for all finishes products of Burlington exposed valves AF1S, AF3S, BF1S, BF2S, BF3S & bath wastes W2, W15, W3, W4
SP1166	housing for W15, W2
V30	outlet elbow 1, 2
SP915	overflow cover of bath filler W2, W15 (including grub screw & handle)
SP1314	overflow outlet base for W15, W2
SP1266	plug hole of bath waste for CW9, W2, W15
SP808	plug of bath waste for product W15, W2, CW9
V18	shower hook (for wall mounting of telephone shower head)
SP1217	the top washer for all finishes products of W14, W17, W15, W13, HOX.0402