Welcome to the Bathroom Brands Technical Whitebook
search
autorenew
Classic 1910 dual outlet bath shower set
Product Options
Pressure options
Air Burst showerhead options
Shower head wall mount options
|
High pressure
|
Low pressure
|
|
9" Air Burst showerhead
|
6" Air Burst showerhead
|
12" Air Burst showerhead
|
|
Wall arm
|
Ceiling arm
|
As Shown
| TK14 Dual Outlet digital processor with Traditional trim kit - high pressure |
| V11 Straight shower arm for wall mounting |
| V60 12 inch shower rose |
| W15 Bath overflow filler for single ended bath |
| TK4L - Combined product code |
Colour
| TK14 - - chrome |
| V11 - shower arm - Polished Chrome |
| V60 - shower rose - Polished Chrome |
| W15 - waste - Polished Chrome |
Nett Weight
| TK14 - - 1.95kg |
| V11 - shower arm - 0.304kg |
| V60 - shower rose - 1.67kg |
| W15 - waste - 1.17kg |
Gross Weight Including Packaging
| TK14 - - 4kg |
| V11 - shower arm - 0.39kg |
| V60 - shower rose - 2.17kg |
| W15 - waste - 1.7kg |
Packed Dimension
| TK14 - 532 x 410 x 144 = 0.0314 m3 |
| V11 - 85 x 65 x 450 = 0.0025 m3 |
| V60 - 356 x 342 x 102 = 0.0124 m3 |
| W15 - 815 x 125 x 128 = 0.013 m3 |
Guarantee
|
5 year guarantee*
*Full terms & conditions here |
Standards Information
Additional Information
|
Consistent temperature - A built-in thermistor checks the temperature 10 times every second so that, even when someone is using water elsewhere in the house, the water temperature will stay exactly the same. |
|
Shower controls are kept completely separate from the water in the valve, which means they always stay cool and safe to touch. |
|
If there are any problems with your water supply, the shower will shut off immediately. This gives you the peace of mind of knowing your family are fully protected from hot water scalding or the discomfort of an unexpected cold shower. |
|
Each digital processor has a pre-set maximum temperature of 41°C, which can be overridden and adjusted to 46°C. As bath temperatures are usually higher, when you divert to the bath outlet the maximum temperature will automatically rise to 44°C. |
|
Installation - Push fit isolation valves, a standard electrical plug fitting and easy to set up cable connections allow make your plumber’s job simpler. |
|
Cleaning mode - While the shower is off, set the temperature to midway between hot and cold, then press and hold the dial for 5 seconds. The light on the controller will come on to show you it’s locked, then after one minute it will automatically unlock. |
| SP417 | bolt for CW9, W2, W15 |
| SP108 | ceramic ring for all finishes products of Burlington exposed valves AF1S, AF3S, BF1S, BF2S, BF3S & bath wastes W2, W15, W3, W4 |
| SP1166 | housing for W15, W2 |
| SP915 | overflow cover of bath filler W2, W15 (including grub screw & handle) |
| SP1314 | overflow outlet base for W15, W2 |
| SP1266 | plug hole of bath waste for CW9, W2, W15 |
| SP808 | plug of bath waste for product W15, W2, CW9 |
| SP1217 | the top washer for all finishes products of W14, W17, W15, W13, HOX.0402 |
Downloads
- Instructions - PDF - V11 (English)
- Instructions - PDF - V60 (English)
- Instructions - PDF - W15 (English)
- Instructions - PDF - W15 (French)
- Instructions - PDF - V11 (French)
-
2D CAD-File - DWG -
TK4L
(TK4S_TK9S__TK4M_TK9M__TK4L_TK9L.dwg)
-
2D Drawing - PDF -
TK4L
(TK4S_TK9S__TK4M_TK9M__TK4L_TK9L.pdf)
2D Drawing - PDF - TK4L
- 3D DWG - File - DWG - V60 (V60_12_showerhead.dwg)
- 3D DXF - File - DXF - V60 (V60_12_showerhead.dxf)
- 3D IGS - File - IGS - V60 (V60_12_showerhead.igs)
- 3D IGS - File - IGS - V11 (V11.igs)
Saved
Product name:
asaq2.Model.Web_product_new?.web_name
asaq2.Model.Web_product_new?.web_name